News

Home / News / What are the basics of lawn mower motors

What are the basics of lawn mower motors

Saw Motor Oil Notes: Two-stroke engines use a mixture Steering Drag Link of gasoline and oil. Gasoline and engine oil must be adequately supported and mixed to keep the engine oil well-balanced. Dilute in gasoline. Too much oil entering the cylinders at any one time will prevent the fuel from igniting and cause the engine to stop running. At the same time, too much oil will cause serious carbon deposits on the spark plugs and piston rings; when there is too little oil, the cylinder wall will not be able to be lubricated, aggravating the damage until it "pulls the cylinder", resulting in a major accident.

Mower Deck Aluminum Spindle Assembly For Heavy-Duty Precision
Mower Deck Aluminum Spindle Assembly For Heavy-Duty Precision
Product Description
Spindles are designed tough for long lasting performance. Heavy-duty housings and precision bearings ensure a quality cut year after year. U
Mower Deck Aluminum Spindle Assembly is a crucial part for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing.
This spindle assemble is combined from bearings, spindle housing, spindle, and tube.
With our excellent quality control, we could assure the torque forces within 0.13N.m after assemble.


The ratio of mixed oil is: special oil for two-stroke: gasoline is recommended for gasoline of 90# or above, and four-stroke oil is prohibited for two-stroke oil. Other two-stroke oil: gasoline = 1:25. It is proposed that the new machine should apply 1:40 special oil in the first 30 hours, and 1:50 normal ratio after 30 hours. It must not exceed 1:50, otherwise the concentration will be too thin. Make the machine drive the cylinder. Please strictly implement the oiling gun provided with the machine, and do not add oil at will.

It is recommended to apply the mixed oil now, and prohibit the 48v electric lawn mower motor from applying the mixed oil that has been used for a long time. Current lawn mowers consist of a small engine plus a transmission section and a working section. It consists of a clutch plate, an outer rod, a rotating shaft, a gear box, a working head, a control part and a shock absorber part. Overwork will reduce concentration and become the cause of accidents.

The electric lawn mower motor should not operate for more than 60 minutes at a time, followed by a 10 to 20 minute rest period. When weeding with the weeding head, the length of the weeding rope should be kept within 15CM. When using the blade, the balance of the blade should be ensured (otherwise there will be strong vibration), and the blade with vibration should not be used.